PROJECT-SPECIFIC STPX SYSTEMS
BIO3T-STPX
Silvercraft has the capacity to design and manufacture project specific STP systems to cater for the demands of any projects.
PROJECT SPECIFIC STP SYSTEMS
 |  |  |
|---|---|---|
 |  |
Silvercraft products limited takes pride in creating custom specific STP systems, our flexibility and knowhow to design and build such systems many times proved to be an asset to our demanding clients.
CUSTOM | PROJECT SPECIFIC | FLEXIBLE DESIGN
The design of a Bio3T-STPx will be based on the specifications set by the client and environmental constraints of a project. A design brief is setup and our experiences will start designing a plant that will meet these requirments. upon confirmation of the design, the projects is sent to our manufacturing facility where we fabrication will kick off.
​
The basics of the plant will always remain the same a submerged, fixed film plastic media that promotes biomass growth. This is achieved by injecting oxygen in the water through a set of special HDPE membrane diffusers located at the base of the second stage tanks. The fine bubble aeration is carefully controlled, providing optimum oxygen transfer rates and scouring to slough off excess biomass while keeping the thickness of the fixed biological film at optimum levels. The final settlement tanks are designed to provide maximum settlement of any suspended solids prior to discharge, with a small sludge return pump returning flow back to the biological tanks and the primary settlement tanks .
BIO3T-STPX SERIES
CASE STUDY
Our key market so far is based in Ireland and thanks to our key collaborators FM Environmental Ireland.
Location: Charleroi Airport, Brussels, Belgium 3000PE STP
Application: Airport
Equipment:
Three 1000PE media tanks (biological) for below ground installation
Effluent ​Production: 450m3/day
Effluent Quality: BOD < 20mg/l. SS<30mg/l
CASE STUDY
Our key market so far is based in Ireland and thanks to our key collaborators FM Environmental Ireland.
Location: Archirodon 500PE STP
Application: Oil field – work camp
Equipment:
Pumping station
Two above ground UT2 tanks (biological) with ladders & hand railing
Two above ground UT3 hopper tanks (final settlement) with ladders & hand railing
Duty/stand-by equipment
Tertiary filtration (sand filtration)
Chlorination
Control house (air-conditioned)
Effluent ​Production: 100m3/day (peak flow of 14.1m3/h = 3.4DWF)
Effluent Quality: BOD < 10mg/l. SS<10mg/l, chlorinated for storage for irrigation use